Tôi là Nguyễn Hữu Hưng, CEO THIẾT BỊ QUAY PHIM chuyên cung cấp Phụ Kiện Studio Tại Hà Nội - Hồ Chí Minh
HL STUDIO đơn vị sáng tạo trong lĩnh vực ngành ảnh!!.
Công ty chúng tôi tạo nên giá trị qua dịch vụ cung cấp, tư vấn và hỗ trợ lắp đặt sử dụng hoàn chỉnh các phụ kiện studio chất lượng cao (đèn chiếu sáng, thiết bị ghi âm, chân đèn, chân máy quay, bộ kẹp micro, v.v.) dành cho những người đam mê nghệ thuật quay phim.
View all posts
Description
Bộ truyền tín hiệu video không dây SDI/ HDMI WHD151 đến từ thương hiệu SEETEC. WHD151 hỗ trợ đầu vào và đầu ra 3G / HD / SD-SDI, HDMI với khoảng cách truyền từ 150m – 200m. Vỏ được làm từ hợp kim nhẹ dễ dàng di chuyển, sản phẩm bộ truyền video Wireless SEETEC WHD151 được phân phối tại thietbiquayphim.com với giá tốt nhất thị trường.
SEETEC WHD151 Wireless HD Transmission System
SEETEC WHD151 is ideal for filmmakers to transition between scenes effortlessly, the director and photographer can exert their creativity, improve shooting efficiency, especially the special effects shots, especially the need wireless transmission.
SEETEC WHD151 is the broadcast industry wireless system, includes a transmitter and a receiver, with WHDI (OFDM) technology, supports uncompressed 3G/HD/SD-SDI and HDMI wirelessly transmitted in 150 meters scale (max 200m). The wireless system runs at 5.1-5.9GHz License-free operation frequency. The frequency bands are user configurable. User can set several receivers at the same frequency bands as the 1 transmitter to enable the multicast mode. The system is pure hardware connection, plug and play build-up. Exquisite design, equipped with external SONY F970 battery mechanical interface for battery plug-in, which is widely used in film shooting, live sporting events, director monitoring, remote monitoring, live wedding broadcasting and forum broadcasting etc.
WHDI Wireless Transmission System
SDI and HDMI, 150 meters
WHD151 is the broadcast industry wireless system, includes a transmitter and receiver, with WHDI (OFDM) technology, supports uncompressed 3G/ HD/ SD-SDI and HDMI wirelessly transmitted in 150 meters scale (max 200m), and with less than 1ms latency. The system is pure hardware connection, plug and play build-up, which is widely used in on-site shooting and director monitoring.
High Quality HD 1080P
Uncompressed SDI/HDMI, less than 1ms latency
The WHD151 3G-SDI/ HDMI Wireless Video Transmission System from SEETEC is able to transmit Full HD 1080p video at up to 150m line-of-sight with no quality loss and less than 1 ms latency. It can transmit even further; up to 200m line-of-sight (depending on conditions), but at this extended range some loss in quality may be experienced.
SDI/ HDMI Input and Output
Meet your different needs
The transmitter supports:
3G/HD/SD-SDI input X 1
HDMI input X 1
The receiver supports:
3G/HD/SD-SDI output X 1
HDMI output X 1
The receiver SDI and HDMI are output simultaneously. If both SDI and HDMI is input to transmitter, the receiver will give priority to output SDI signal.
5.1-5.9GHz Operation Frequency
10 different frequency points
The WHD151 wireless system runs at 5.1-5.9GHz License-free operation frequency. The frequency bands are user configurable and support at most 4 sets of wireless transmission in one location. Without the trouble of many signal lines, allowing filmmakers to capture and transition between scenes effortlessly.
Multicast Support
1 transmitter to multi receivers
Support point to point / point to multi-point transmission mode, support 1 transmitter to multi receivers, You can set several receivers at the same frequency bands as the 1 transmitter to enable the multicast mode. Without signal line, wireless transmission more efficient, the signal does not decay.
Simple and Reliable
Use AES-128 data encryption transmission, data security and reliable, give you more secure encryption protection. The 5GHz band, no affected by 2.4GHz band equipment and low frequency interference.
Power Supply and Installation
Both the transmitter and receiver are compact size designed, both the TX and RX feature 1⁄4”-20 holes for mounting to cameras and equipped with SONY F970 battery plates to be powered by standard F970 camera batteries. The transmitter and receiver can also be powered via the 4-PIN LEMO DC in socket of 7-36V input.
Tôi là Nguyễn Hữu Hưng, CEO THIẾT BỊ QUAY PHIM chuyên cung cấp Phụ Kiện Studio Tại Hà Nội - Hồ Chí Minh
HL STUDIO đơn vị sáng tạo trong lĩnh vực ngành ảnh!!.
Công ty chúng tôi tạo nên giá trị qua dịch vụ cung cấp, tư vấn và hỗ trợ lắp đặt sử dụng hoàn chỉnh các phụ kiện studio chất lượng cao (đèn chiếu sáng, thiết bị ghi âm, chân đèn, chân máy quay, bộ kẹp micro, v.v.) dành cho những người đam mê nghệ thuật quay phim.
View all posts